– Hand processing jig.
– Assists in drilling 1mm diameter holes on the ends and sides of round rods.
– Compatible with plastic round rods with diameters of 2, 3, 4, and 5mm.
– Jig for drilling straight holes into the core (end face) and side of plastic round rods.
– Exclusively for 1mm diameter drill bits.
– For holes smaller than 1mm, use a drill bit with a 1mm shank and a smaller diameter tip (ensure the blade length is at least 18mm for core and end face processing).
– Ensure that the plastic rods are adjusted to the specified size for high precision processing.
– Example: When using a 2.0mm hole, suitable for 2.002.05mm.
– Initial use requires threading a hole for the drill bit.
– Insert a 1mm size drill to remove excess plating thickness inside the drill hole.
– Always use the specified size drill bit. Using incorrect sizes may damage the inner wall, reduce precision, or cause the bit to get stuck.
– Please note that there may be minor surface scratches that do not affect usage.
Product Specifications:
– Size: W25mm x D30mm x H8mm
– Material: Brass (nickel-plated)
– Compatible materials: Plastic
– Country of manufacture: Japan
– From mid-September 2019 shipments onward, the design has been changed, with no functional impact. The lane appears slanted when viewed from the front on the 2019-September model.
– Additionally, there is a size change: D33mm D30mm
– Package Size/Weight: 13.4 x 7.3 x 1.9 cm / 39g
Reviews
There are no reviews yet.