Features:

– Water-proof and dust-proof for all weather races
– Small size with built-in capacitor module
– Multiple protections: Low voltage cut-off protection for Lipo or NiMH battery / Over-heat protection / Throttle signal loss protection
– Easily programmed with jumpers

Specification:

– Application: On-road/Off-road
– Cont. / Burst Current – forward: 40A / 180A
– Cont. / Burst Current – reverse: 20A / 90A
– Input: 2-3S LiPo / 5-9 Cells NiMH
– Battery “Low-Power” Cut-off: NiMH 4.5V / 2S LiPo 6.5V / 3S LiPo 9.75V
– Motor Limit 2S LiPo/5-6 Cells NiMH: 540 or 550 Motor =12T or RPM <30.000 @="">
– Motor Limit 3S LiPo/7-9 Cells NiMH: 540 or 550 Motor =18T or RPM <20.000 @="">
– Maximum Reverse Force: 50%
– Overheat Protection: 100
– Resistance: Fwd: 0.002 Ohm, Bwd: 0.004 Ohm
– Built-in BEC: 2A/6V (Linear Mode BEC)
– Plug System: Tamiya
– Plug & Drive System: Yes
– On/Off Switch: Yes
– Dimmension (L/W/H): 46.5*34.0*28*5 mm
– Weight: 70g

Specification Motor:

– Turns: 17x2T
– RPM: 26.300
– Continuous Current: 155W
– Operation V: 7.2V-7.4V
– Motor size: 540
– Shaft length: 12,3mm
– Shaft : 3,19mm
– Motor length: 53,2mm
– Motor : 35,7mm
– Brushess & Springs changeable: Yes